How to Measure
Measuring Your Bathroom and Kitchen Cabinets in Phoenix | AZ Cabinets
When you are planning to remodel your bathroom or kitchen, one of the most important procedures is measuring the cabinets. It is very important because it determines how big a cabinet you can have and what fixtures will fit in them. To measure correctly, every measurement should be taken from wall to wall, inside corner to the inside corner. You should take measurements of your existing cabinets and the surrounding walls to ensure you have enough room for all of your cabinets.
Standard Cabinet Size
In the bathroom, your standard cabinet size is 21 inches wide by 21 inches deep, and in the kitchen, the standard cabinet size is 24 inches wide and 34.5 inches tall. Of course, there are a variety of other sizes available for cabinets, but these are the most common ones used.
Determining Your Under-Cabinet Space
The depth of your cabinet is determined by the distance between your countertop and where ever you plan to place it. You should measure from the cabinets above and determine how much space you have to work with. Your under-counter space for a kitchen cabinet and bathroom cabinet can be 12 inches or 18 inches deep.
When you are adding cabinets to a room, it is vital to take measurements correctly, especially when it comes to the depth of the cabinet. If too large of a cabinet is ordered for your bathroom or kitchens under-counter space, you can have problems with items not fitting correctly unless placed far back in the cabinet, which will leave things in the front of the cabinet challenging to reach.
Measurements should be taken to ensure that you have enough room for both your cabinets and any plumbing fixtures, such as faucets or toilets. This is especially true in the kitchen because replacing parts will cost much more than just getting them installed correctly by a professional if your measurements are too small.
Getting the Best Fit for Cabinets
When ordering cabinets, you need to make sure they fit before accepting them as a final product. If possible, try and go over beforehand like do is measure your space if it is small enough to offer this service before purchasing new cabinets. If all else fails, take a measuring tape with you to the store and check to make sure everything will fit properly. You can even measure your existing cabinets to understand better what size new cabinets should be ordered.
In most cases, you can save money if you know how to measure your cabinets correctly. You will spend more than necessary by ordering too large of cabinets, and the same goes for the opposite. If you want to get the most out of your money while increasing your home’s value at the same time, learning how to measure cabinets is one way to do just that.
How to Measure Your Cabinets
To ensure an excellent design measurement of the walls, where the cabinets are going to be placed must be taken. It is essential to measure the full length that the cabinets extend to, not where the countertop ends.
If there is a window, measure how far the edge of the window or window casing is to the corner, as well as the total length and height of the window. If the kitchen does not have a corner to go off, it is still vital to get the measurements of the window’s location so that we can determine how it may impact the placement of cabinets.
Ceiling height must be measured to determine the size of upper cabinets going in.
Center measurements of the sink, stove, fridge, and any other appliance in the layout are needed.
Additional photos of the current kitchen will help us have a better understanding of the measurements brought in.
Make a note of the ceiling color, flooring color, and type, as well as any other appliances in the kitchen, so those can be taken into account. Cabinet measurements will vary according to the size of the kitchen and bathroom, whether or not the area is open to another room, and where exactly storage space is needed.
Cabinet Measurement Tips in Phoenix, Arizona
Measure your cabinets using these tips for an efficient design process.
- Place cabinets accordingly in order to make room for other appliances in the kitchen. Keep counter space clear by matching the height of cabinets to the countertop.
- Keep in mind that the backsplash will cut into the depth of your cabinet, so make it deep enough to accommodate any backsplashes needed.
- Under-cabinet lighting can be added for convenience and style with most types of cabinets.
- If you are looking at islands or large kitchen tables, understand that they will take up some counter space, and the size of cabinets must be adjusted accordingly.
- Ensure that your kitchen can accommodate a refrigerator, sink, stove, and oven in that order of placement.
- Most styles of cabinetry feature cabinets specifically designed for storing appliances, which come with a variety of configurations to create workspaces around them.
- Oversized cabinets are often required to accommodate larger appliances and ensure additional storage space is present.
- For your bathroom, consider the type of cabinet you want to use, as well as its size.
- Measure entryways into rooms like laundry rooms and pantries that need cabinets designed for them.
- When measuring small bathrooms, make sure there is extra storage space for items like toilet paper and other necessities.
- Work with a cabinet specialist like AZ Cabinets in Phoenix, Arizona, to determine what cabinet sizes will work best for your needs.
With the correct measurements of your cabinets, you can design an efficient layout that maximizes your space and takes into account everything needed in the kitchen, bathroom, or any other area in your property. Measure your cabinets to build a better, more organized design.